Cute vows for him

Cute vows for him

Carpet floor without leaving any residue solve

When old carpets Marks, stains, holes or other signs of wear and tear have, it’s time for a new carpet to lay. First of all the old carpet from the surface must be eliminated solved. If the carpet is glued tightly together, it is sometimes quite difficult, because of the remains of the Material or adhesive left behind. In the Following you will get some valuable tips to make the carpet easier to remove. Very thorough, and reliable, but it is possible if the experts of the tiles or floor layers operation attention. You have the necessary experience and modern technical equipment, in order to eliminate the carpet flooring of all kinds, thoroughly and without leaving any residue.

Preparations for the carpet removal

A professional carpet removal you should best the following address:

In the first step, the carpet must be removed to afford. For this, slide a putty knife behind the baseboard and pry the Bars.

In the second step, you should determine the type of carpet bonding, to find out what tools are available for the carpet, removal is necessary. If only the carpet edges are glued, resting on the carpet in the rule on the adhesive strip and can easily be peeled off.

To do this, you lift the carpet to one side and pull him in the opposite direction. If necessary, help them with a little solvent and a spatula

After you cut out the old carpet to make it easier to dispose of it in strips.

Carpet removal: how to

  • Carpet bars with a spatula
  • Type of carpet bonding check
  • Carpet on one side, lift it in the direction of the pull to the opposite corner
  • if necessary, carpet, moisten the soil with water or use solvents

Solid carpet glued to solve

Not all carpets can be easily and quickly from the ground to replace. Therefore, you should keep the carpet, removal is always a lot of tool:

  • Spatula
  • Carpet knife
  • Bucket or watering can
  • Hand or carpet stripper

In some cases, carpets are glued with glue or synthetic resin. In this case, you are difficult to resolve. In the case of water-soluble glue is, the soil should be thoroughly (by bucket or watering can), soaked.

Depending on the type of flooring under the carpet, you need to proceed cautiously.

You do not pay attention in the case of wooden floors to the fact that the moisture runs through to the ground. After about two hours, the water is drawn in and dissolves the glue.

Then, pull the carpeted floor. To lift him to a corner of the room and pull him in the direction of the opposite corner. Unfortunately, this works in the case of water-insoluble glue, and resin is not.

The Carpet Stripper

Only specialist can help specific power tools such as a carpet stripper. A Stripper is firmly bonded carpet floors within a few minutes from the ground to replace, without leaving a residue.

To assist, the carpet is cut in the bottom of the wall, starting in the 30 to 50-centimeter-wide strips with a carpet knife. These strips can then use a hand stripper solve. If the bonding and structures are to be persistent, it must be replaced by the hand, stripper by powerful electric tools.

An electric carpet stripper solves carpeted floors and carpet remnants with a powerful sound to use, as well as by the formation of a pressure pad. Such devices, however, are expensive and carry-consuming. In addition, they should be of a trained Hand.

Floor layers and tile setters have modern and powerful carpet stripper. Therefore, you should soil the Removal of strongly bonded and adhering carpet to you.

Remove and imperfections offset

When the old carpet was removed by Hand or with a carpet, a stripper, has to be prepared the ground for the installation of the new carpet.

For this, all carpet and adhesive residues thoroughly with a spatula or other suitable machine away. Then unevenness in the floor with a putty balanced. This work must be carried out with precision. Uneven floor surfaces can cause the formation of moisture and mold under the carpet. In addition, the carpet glue can react stalls with remote adhesive back.

You want to carpet a professional installer, you have to prepare for the experts of the tiles or floor layer operation. Specialized companies from your area, visit local.

ch.

Browse local.ch to the floor coverings in your area

Carpet stripper – FAQ

Who can carry out professional carpet removal?

Specialists from the floor and tiles industry, have the Know-how and the right tools, old carpet of any Size and brand thoroughly and remove without any residue. Modern power tools such as a carpet, a stripper and a high-pressure cleaner to facilitate and accelerate the work. The preparation of the installation can be performed in a workmanlike manner. So the new carpet can be applied precisely and expertly.

Why do you need the carpet removal carpet stripper?

Some carpets are very bonded strongly, so that they cannot be solved by Hand from the ground. Then it helps to have a carpet stripper. He works with a pressure pad and triggers attached carpets quickly and thoroughly. Neither Material remain – still glue residue. This facilitates the preparation of the soil for the new installation. The Stripper there are manual and electric devices.

Why should be cut in the carpet before using a carpet stripper on?

Before the carpet stripper is used, you should use the old carpet with a carpet knife lengthwise into strips of 20 to 30 centimeters in touch.

The carpet stripper generates a pressure pad, lifting the carpet. So it can cut easier with the Blades of the device, and the soil replaced.

Why is it necessary Material and glue residues are completely removed from the ground?

Often after a carpet removal in Material and glue residue on the floor. These must manually or with the appropriate tools to be completely removed. Uneven floor surfaces can cause moisture and mold to form under the new carpet. In addition, old adhesive residues can cause unwanted reactions with the new carpet adhesive, and the adhesive effect.

You must be prepared with a high-pressure washer for the new installation?

The use of a high-pressure cleaner of any brand is useful to dirt, dust and dissolved Material and adhesive residues quickly and thoroughly from the bottom to remove. Thus, the ground is quick to clean. However, a high-pressure cleaner on wooden floors and other water-sensitive floors should not be used. Otherwise, it can damage the parquet arise, quick repair must. Here, you can instead use a leaf blower or another fan.

Solvent is suitable for the carpet removal?

If the carpet with water-insoluble glue bonded to a solvent to help. However, its use in large quantities is harmful to health. In addition, you can move through the old carpet in the floor. Therefore, you should prefer to abandon the chemical Mace, and the experts from tile and floor – laying craft with a carpet stripper do the work.

Browse local.ch to the floor coverings in your area